Typical Installations
Kingston Forge Ironwork will be able to discuss all of your needs and requirements. Detailed below are a couple of typical installations to give you an idea of the kind of system you would expect to be installed.
Automating Existing Gates
Manual gates often remain left open, allowing you and your visitors to come and go without having to shut them. If you have a set of existing gates that you would like to automate there is every chance that Kingston Forge Ironwork will be able to accommodate you and will be able to asses if your gates need any adjustments or if they're ready to automate immediately.
Should the gate pairs be in sound condition; parallel and undamaged, your gates should be suitable to have retrofitted automation. 
Otherwise repairs can be undertaken; once again Kingston Forge Ironwork will be able to advise you on all aspects of automating existing gates.
A Typical Swing Gate System
Most people will have a system similar to this. The system consists of; A pair of gates, a pair of gate operators, a control panel with electronics for operating the gates, a couple of remote controls and an intercom or numeric keypad plus a pair of photoelectric cells and a collapsible rib for safety.
The gates will usually be operated with a 'single hit' option, whereby the gates open when you press the remote control and close automatically after a short preset delay allowing you time to proceed through the entrance.
Click here to see the quality of our ironwork in our online gallery